Admission Helpline: 07969024444 ('0' dialing is mandatory before calling)
info@medicaps.ac.in
Admission Open for 2023-2024.

M.Tech. - Electrical Engineering(EE)

Electrical Engineering(EE)

M.Tech. in Electrical Engineering (Specialization - Power Systems) is a 2- year full- time course divided into 4 semesters involving an advanced study of electrical and electronics engineering, computers, and communication, besides that of electronics, electricity, transmission, and generation.
 

Foto

Eligibility

  • As per State/Central Government norms
  • Based on GATE/Entrance/Qualifying Examination
  • Should have qualified B.E./B.Tech. or equivalent program from any recognized university (Minimum 50% aggregate marks)

Career

MNC's, PSU's, Government sector (GATE, MPPSC, SSC, IES, IAS, RRB, ISRO, GRE) Defence, Banking sector, MBA, Industry, Academic, Research

Syllabus/ Scheme

Electrical Machines LAB

The Electrical Machine lab enables the students to understand and consolidate the behavior of different kinds of electrical machines viz. DC machines, Induction /Synchronous machines and others also under different loading conditions. Students strive real hard to understand the application areas of these machines as per the different industrial requirements. Facilities available are:

  • DC Shunt motor 5HP 220V, 1500rpm coupled with DC Shunt generator of 220V, 3kW on channel frame with control panel.
  • DC Series motor of 5 HP 220V 1500rpm coupled on channel frame with DC Series generator of 220V 3 kW with control panel.
  • DC commutative compound motor Of 5 hp 220 volt 1500 rpm coupled on channel frame with DC shunt generator of 220volt 3 kW, with control panel.
  • Two identical Dc shunt motors of 5hp, 220Volt, 1500rpm coupled on channel frame with control panel.
  • DC compound motor of 5hp, 2220 volt, and 1500 rpm with break load pulley and dial type spring balances with control panel.
  • Three single phase transformer of 3kVA, 230 volts with primary and secondary in two halves with tapping at 50%, 86.6%and 100% with control panel.
  • 3 phase squirrel cage induction motor of 5hp, 440 volt, with brake load pulley belt load changing arrangement & control panel.
  • Synchronous motor of 5hp, 415 volt and 3-phase coupled with 0.75 kW DC generator for excitation and 230 volt, 3.0kw, 230 volt dc shunt generator with control panel.
  • DC Shunt motor of 5hp, 220Volt, 1500 rpm coupled with 3-phase 3kVA, 440Volts alternator salient pole rotating field type with control panel.

Software LAB

The Departmental Computer Laboratory serves the students in two major ways. High-end computer servers loaded with standard software tools contribute towards the research activities; larger number of PCs is made available so as to fulfill the teaching requirements.
The computer laboratory is equipped with 23 P-IV PCs. This set up is primarily used for training students in their course work. Additional facilities such as laser printer are also available. The efforts are being made to upgrade these computing facilities from time to time. 
Central computer servers are dedicated for particular kind of applications either by making use of freeware or commercial software programs. Important software programs, which are routinely being used, include MATLAB and SCILAB etc.

Instrumentation, Control LAB and Network LAB

Instrumentation & Control engineering lab provides opportunity for the students to learn and fulfill the industry demands of Instrumentation and Control Engineering. The Department has state of art equipments in the laboratory.
Today automation being the primary objective which is fulfilled by the lab facilities providing students to have hands-on with different control schemes viz PID etc. and practice on calibration, transducers etc as well. Facilities available with the labs are:

    (ii)        Instrumentation LAB

    1.         Complete Exp.set up of measurement of resistance by volt drop method.
    2.         Complete Exp. set up of low of charge method.
    3.         Wheat stone bridge kit.
    4.         Complete Exp. set up to find out low resistant by Kelvin double bridge with Conductivity attachment.
    5.         Complete Exp. set up of Calibration of PMMC voltmeter and Ammeter by Crompton potentiometer.
    6.         Calibration of wattmeter using DC potentiometer.
    7.         Maxwell’s inductance capacitance bridge kit, Anderson bridge kit for self inductance, Experimental inductance bridge Frequency by Wein bridge kit.
    8.         Calibration of dynamometer power factor meter, Complete set up of Calibration of LPF wattmeter, Complete set up of Calibration of single phase energy meter.


    (ii)        Control LAB:

    1.         Trainer board of simulation of transfer function using OPM
    2.         Trainer board of Type 0, Type1, and Type2 control system.
    3.         Trainer board of AC Servo motor speed / torque characteristic.
    4.         Trainer board of DC Servo motor speed / torque Characteristic
    5.         Trainer board of characteristic of magnetic amplifier.
    6.         Trainer board of DC position servo system.
    7.         Trainer board of study of Synchros.

Power System & Switchgear LAB

The scientific field of the Power Systems Laboratory comprises analysis and design of electric and integrated energy systems including their planning, design and operation.
With this view the lab provides the facility to interact and analyze with different relays and study of breakers.

The facilities available are:

Over current relay, IPFC, Relay MPR301, DOL starter, Star Delta Starter, Tachometer,
Megger, Coil Wdg machine, Buchholz Relay, IDMT relay, Earth fault Relay, Intelligent Panel meter, Directional OC Relay, Static Relays, Tong tester etc.

1.       Test Bench of Differential Relay.
2.       Test Bench of Differential Over-Current relay.
3.       Test Bench of IDMT Over-Current relay
4.       Test Bench of Earth fault relay.
5.       Transmission line (T and pi) module for parameter determination.
6.       Transmission line (T and pi) module with compensation.
7.       Ring mains system module.
8.       Radial mains system module.
With all the necessary required instrument/ devices.

Power Electronics & Drives LAB

The department has a Power Electronics Laboratory well equipped with drive-control kits based on SCRs, IGBTs, MOSFETs, TRAIC, DIAC, UJT etc. and based on various configurations such as converters, inverters and chopper. The department has different oscilloscopes for the most use of students in their lab/ project works.

The facilities available are:

  • Different firing circuit modules.
  • Different Commutation modules.
  • Single phase/ three phase rectifier/ Inverter modules.
  • Chip based firing modules, etc.

With Power Scope ST224, Digital multimeter, CRO SM902, Anshuman PE kit with Modules, Fan Load.

The Drive lab is under procurement.